MIG CARBON STEEL 3/16″ THICK 2F OUTSIDE CORNER

FESCH.TV INFORMIERT:

WELD PROCESS = GMAW, SHORT CIRCUIT MIG, GAS METAL ARC, BARE WIRE MIG
METAL TYPE = CARBON STEEL, COLD ROLLED STEEL, AISI 1010

THICKNESS = 3/16″

WELD TYPE = Fillet weld

JOINT TYPE =corner

POSITION = 2F, horizontal

VOLTS = 18.6 volts

WIRE SPEED = 190 IPM

WIRE SIZE = .035″

AMPS =

POLARITY = DCEP

GAS FLOW = 20-25 CFH C25 GAS

CTWD = 3/8”-1/2″

TUNGSTEN =

FILLER METAL = ER70S6

ADDITIONAL SETTINGS =

TIPS:

A relatively short stickout aka contact to work distance CTWD of 3/8” to 1/2″ makes a big difference.

There seems to be a wide range of settings that will work on outside corner joints depending on the desired outcome and customer requirements.

Lower wire speed settings slow the travel speed and can achieve a different appearance.